The US Pull-Out Kitchen Faucet Buying Guide: Reach, Deck Configurations, and Finishes, Explained
A pull-out faucet keeps a low, streamlined profile and extends forward over the counter — the right choice when cabinet clearance is tight, your sink has two bowls, or you need to rinse the counter itself. This guide explains how pull-out faucets differ from pull-down models and how VIGO's two bridge and standard designs compare.
The Cass Bridge in matte black: a pull-out design with two independent inlets for hot and cold — no mixing valve required.
At a glance
VIGO's pull-out collection currently runs two models — the Cass Bridge and the Cass Kitchen Faucet with Sprayer — both in solid brass with ceramic disc cartridges, starting from $274.90. The Bridge is a rare US offering for traditional kitchen styles; the Cass Sprayer suits modern farmhouse and transitional designs.
When pull-out wins over pull-down
Three scenarios where the low arc is the right choice
Cabinet clearance is the first deciding factor. A pull-down spout sits 16–20 inches above the deck — fine for standard 36-inch upper cabinets, but problematic in kitchens with low overhead shelving, a window directly behind the sink, or an under-cabinet appliance mounted close to the backsplash. A pull-out spout sits 8–12 inches tall, which almost always clears these constraints comfortably.
Double-bowl sinks are the second scenario. A pull-down spray head drops into whichever bowl you're standing over; a pull-out hose extends forward and can reach across the divider to the second bowl with a lateral swing. If you use both sides of the sink regularly — one for washing, one for rinsing or soaking — the pull-out gives more flexible coverage without repositioning your body.
Traditional and farmhouse kitchen styles are the third. The bridge faucet design — two separate columns joined at the spout — is architecturally appropriate for Shaker cabinets, apron-front sinks, and period-inspired kitchens where a sleek pull-down body would look out of place. VIGO's Cass Bridge is one of the few US-market pull-out bridge faucets built to modern plumbing standards.
Bridge vs. standard pull-out
Two inlets vs. one: what changes under the sink
A standard pull-out faucet — like the Cass with Sprayer — uses a single mixer body with one supply inlet that connects to a hot/cold mixing valve under the sink. Installation is straightforward: shut off the supply lines, connect a single braided hose, thread the faucet body through the deck hole, and tighten the mounting nut from below. The whole job typically takes under an hour.
A bridge faucet has two separate supply columns — one hot, one cold — each with its own inlet. Under the sink, you're connecting two lines rather than one, and the faucet body spans three deck holes (two for the supply columns, one for the spout). This is standard US three-hole plumbing, so it works with virtually all pre-drilled farm or undermount sinks, but it does require the additional deck holes. If your countertop has only one drilled hole, the bridge is not compatible without drilling — the standard Cass Sprayer with its included deck plate is the better path.
"The bridge faucet is experiencing a real return in US kitchen design — not as a retro novelty, but as the correct architectural choice for farmhouse and Shaker-style kitchens where a single sleek column reads as a mismatch."
Hose retraction and docking
What keeps the spray head in place
The most common complaint about pull-out faucets in the first generation was hose droop — the spray head slides back out of its rest position over time as the counterweight system wears. VIGO addresses this through a weighted hose counterbalance system: a heavy bead on the supply hose keeps constant rearward tension so the head retracts fully and stays docked without magnetic assistance.
The practical result is that the spray head does not creep forward over time and does not require periodic re-tightening of the docking mechanism. For high-use kitchens, this matters: a spray head that sits half-extended disrupts countertop workflow and, in older designs, eventually required hose replacement. The solid brass body and ceramic cartridge in the Cass line are rated for the same 500,000-cycle durability as the rest of the VIGO faucet lineup.
Finish coordination
Matching the pull-out to the rest of your kitchen
VIGO pull-out faucets share the same four finish options — matte black, chrome, stainless, and matte brushed gold — across the pull-down and bathroom faucet lines. If you're renovating a kitchen and a master bath simultaneously, you can specify the same finish SKU and receive hardware that coordinates visually across rooms without sourcing from separate brands.
For the Cass Bridge specifically: the two-column bridge silhouette reads best in matte black or brushed gold, where the architectural detail is legible against white or stone countertops. Chrome works in transitional kitchens where the fixture needs to recede rather than stand out. All finishes carry the same lifetime limited PVD warranty regardless of which color you choose.
VIGO Pull-Out Kitchen Faucets
From $274.90
Cass Pull-Out Bridge Kitchen Faucet
Two-column bridge design with separate hot and cold inlets. Pull-out spray head with stream and spray modes. Requires a three-hole deck. Suited to farmhouse, Shaker, and traditional kitchens.
From $274.90
Shop the Cass Bridge →
Cass Kitchen Faucet with Sprayer
Single-hole pull-out with a deck plate included for three-hole decks. Weighted counterbalance hose retraction, two-function spray head, and the same ceramic cartridge as the pull-down lineup.
From $299.90
Shop the Cass Sprayer →Frequently asked questions
What is the best pull-out kitchen faucet for a farmhouse sink?
The VIGO Cass Bridge ($274.90) is designed for this configuration — its two-column bridge silhouette coordinates with apron-front sinks, and the pull-out head reaches both sides of a wide farmhouse basin without requiring a high spout arc above the window line.
Can I install a pull-out faucet in a single-hole sink?
Yes, for the Cass with Sprayer — it installs in a single 35mm hole with an included deck plate for three-hole decks. The Cass Bridge requires three holes and cannot be used in a single-hole configuration.
How do I stop a pull-out spray head from drooping?
VIGO's weighted counterbalance system keeps constant rearward tension on the hose so the head retracts fully. If you're experiencing droop on an older non-VIGO faucet, the counterweight bead is usually the failed component — it's a sign it's time to replace the faucet rather than repair the hose.
What is the difference between a bridge faucet and a standard pull-out?
A bridge faucet has two separate supply columns with independent hot and cold inlets, requiring three deck holes. A standard pull-out has a single body with one mixer inlet. The bridge is an architectural choice for traditional kitchens; the standard pull-out suits modern or transitional spaces.
Do VIGO pull-out faucets come in matte black?
Yes. Both the Cass Bridge and the Cass with Sprayer are available in matte black, chrome, stainless steel, and matte brushed gold — all with PVD finish protection and a lifetime limited warranty.
Pull-out vs. pull-down: which is easier to install?
Both are comparable in difficulty for a confident DIYer. The standard pull-out (Cass Sprayer) is slightly simpler — one supply connection, one deck hole. The bridge requires two supply connections and three-hole alignment. Both include EZInstall hardware and step-by-step instructions.
Shop VIGO Pull-Out Faucets
Two designs. One standard of quality.
A bridge for traditional kitchens, a standard pull-out for modern ones — both in solid brass with a ceramic cartridge and a lifetime limited warranty, shipping free across the US.
