White VIGO Apollo Peony matte stone vessel sink with a tall brushed nickel vessel faucet on a light wood vanity top

How-To & Care — Vessel Sinks


How to Install a Vessel Sink, Step by Step: Height, Drain, Ring & Seal

The order matters more than the tools: height math first, drain choice second, drilling last. Eight steps, real VIGO dimensions, and the overflow mix-up behind a classic drain leak.

The VIGO Product Team    /    Updated October 2026    /    9 min read

A Matte Stone bowl like the 20 in. Apollo Peony sits right on the counter, so the faucet has to be tall enough to clear its rim.

In short: Plan the height first: the rim lands at counter height plus bowl height, and the VIGO bowls worked through below stand 4 to 5 in. tall, so a traditional 32 in. counter puts the rim at about 36 to 37 in. Then dry-fit the bowl and faucet, drill a 1-3/4 in. drain hole, seat the bowl on sealant (or the mounting ring, if your sink ships with one), and fit a no-overflow drain: a pop-up if you fill the basin, a grid if you never do. Tighten it until snug, no further. VIGO's instructions call for a qualified, licensed plumber.

  • Rim height = counter height + bowl height (+ ring, if used). Work backward from the rim.
  • Most vessel bowls have no overflow, so the drain can't have one either.
  • Pop-up drains hold water; grid drains are always open and empty a full bowl more slowly.
  • Drill the 1-3/4 in. drain hole only after a full dry fit with the faucet.
  • On natural stone or quartz, seal with silicone or stain-free putty. Snug the drain nut; never crank it.
01

Plan the height

How tall should a vanity be for a vessel sink?

Usually about 30 to 32 in. to the top of the counter, because the bowl adds its full height above it. With the 4 to 5 in. VIGO bowls below, that puts the rim at 34 to 37 in.

Work backward with one formula: rim height = counter surface height + bowl height (+ mounting ring, if used). Kitchen & Bath Design News, in an excerpt from the NKBA's Bath Planning guide, gives a lavatory range of 32 to 43 in. for adult users, with the rim about 3 in. below the main user's elbow. It also notes that lavatories have traditionally sat 30 to 32 in. high.

Count the countertop too. MSI puts a 2 cm quartz slab at 3/4 in. and a 3 cm slab at 1-1/4 in., and calls for 3/4 in. plywood under 2 cm quartz, which adds to the stack. The math with real VIGO bowl heights:

32 in. counter + 5 in. bowlRim at 37 in. with the 5 in. Marigold Matte Stone bowl from the VGT1449 set.
36 in. counter + 5 in. bowlRim at 41 in., near the top of the range. Test it against your elbow first.
Target a 36 in. rim4-1/8 in. Matte Shell Modus glass bowl (VGT1431): counter at 31-7/8 in. A 2 cm top on 3/4 in. plywood (1-1/2 in.) leaves a 30-3/8 in. cabinet.
Target a 34 in. rim4 in. Onyx Gray glass bowl (VGT1701): counter at 30 in. A 3 cm top with no underlayment leaves a 28-3/4 in. cabinet.

These are comfort guidelines, not code: drain and supply rough-ins follow your local plumbing code and the spec sheet. Planning for a seated user? The 2010 ADA Standards cap a lavatory's rim or counter at 34 in., a line a vessel on a standard counter often crosses, so plan that bathroom with your designer.

02

Dry fit and mark

What should you do before you drill anything?

Shut off the water, then dry-fit everything. VIGO's vessel sink instructions are firm on two points: the work should be done by a qualified, licensed plumber, and the sink must be dry-fit before any hole goes into the countertop.

Close the shut-off valves under the vanity (or the main valve) and open the faucet to confirm the water has stopped. Unbox the bowl and inspect it for damage. Check that the top is level, clean and firmly supported, because a vessel bowl full of water rests its whole load on a small footprint. Then set bowl and faucet in their final positions and run VIGO's three checks:

  • Handle room. The lever can swing without hitting the wall or backsplash.
  • No contact. The faucet body doesn't touch or crowd the bowl.
  • Stream position. Water lands in the bowl where you want it, ideally near the drain.

Mark the drain and faucet centers only when all three pass, and measure your actual bowl: VIGO's bowls are handmade, so expect slight variation in symmetry. If you are budgeting for a plumber, our bathroom sink replacement cost guide covers vessel installs.

03

Choose the drain

Which drain does a vessel sink need: pop-up or grid, overflow or not?

Almost always a drain without an overflow, because most vessel bowls don't have one. After that, choose a pop-up if you want to fill the basin, or a grid if you never will.

An overflow is the small opening near a basin's rim that feeds a hidden channel into the drain. VIGO's sink drain FAQ says its pop-ups are designed for vessel sinks without overflow, and its sink instructions say the drain has to correspond to the bowl.

Mixing them up is a classic leak. A granted U.S. patent on sink drain pipes (US10808386B2) spells it out: install a drain with an overflow port in a vessel sink, and that port may not be sealed, so water leaks out of it.

VIGO brushed nickel pop-up drain assembly with a side overflow opening in its body, beside its push-to-close cap

Check the drain body before you buy. A side window like this one, on VIGO's Davidson pop-up, is an overflow port: right for basins with an overflow channel, wrong for most vessel bowls. Shown in brushed nickel; the Davidson pop-up is currently stocked in chrome, matte black and matte brushed gold.

VIGO's Elan pop-up drain is solid brass, made for vessel sinks without overflow, and uses Pop & Lock: one push seals, another releases. The Paloma grid drain has no stopper and is always open, and its ClogFree™ design helps keep hair and soap out of the pipe; it is the cleaner look for a powder room.

A sluggish grid isn't necessarily a clog. Water has to pass through a perforated plate, and as a reader tip in Fine Homebuilding points out, an overflow's quiet second job is letting trapped air escape as a basin drains. With no overflow, a full vessel bowl can glug down slowly.

Brushed nickel VIGO Paloma grid drain in a white oval vessel sink on a stone vanity top

The Paloma grid drain: nothing to adjust or lose, at the cost of a slower drain when the bowl is full.

04

Drill the holes

What size hole do you drill for a vessel sink drain?

1-3/4 in. That is the countertop hole VIGO's sink instructions specify, and the standard opening VIGO's drain FAQ says its drains are made for. Center it on the mark from your dry fit, and size the faucet hole to the faucet's spec sheet rather than guessing.

Stone and quartz tops need a bit made for stone and a steady hand, which makes this the step most worth handing to the plumber or fabricator. Never drill or enlarge a glass bowl: tempered glass cannot be cut or drilled after tempering, so you work with the factory drain opening.

05

Ring or sealant

Do you need a mounting ring, or does the bowl sit on silicone?

Only if your sink or drain comes with one. Otherwise the bowl sits directly on the counter on a bead of sealant. The Matte Shell Cavalli round glass set (VGT1435) ships with a matching pop-up drain and mounting ring, and the Elan pop-up's description lists an optional ring that installs between sink and counter with a rubber seal on each side.

VIGO's instructions for the 21 in. Magnolia Matte Stone sink, for example, show the bowl seated right on the countertop, with plumber's putty or caulk as the sealant. Use a ring when your sink includes or calls for one; don't improvise one when it doesn't.

The countertop decides between putty and silicone. Standard plumber's putty is oil-based, which is why putty makers sell stain-free versions for stone: Oatey's oil-free Stain-Free putty, for one, is made for granite, marble and quartz. Silicone is the other safe choice, and Hunker's install guide runs a bead of it around the counter's drain hole under the bowl, which keeps water out of the gap.

06

Set the bowl

How tight should the vessel sink drain nut be?

Snug, and no more. The drain nut clamps the bowl to the counter from below, which takes little force, and VIGO's instructions warn plainly against over-tightening the drain. VIGO also notes that vessel bowls can chip or break if something heavy falls on them, so keep tools out of the bowl.

VIGO's exploded drawing gives the stack from the top: pop-up cap and mechanism, rubber washer, bowl, countertop, soft white washer, white plastic washer, drain nut, then tailpiece nut and tailpiece. Seat the bowl, drop the drain through with sealant under the flange, thread the washers and nut on from below, and tighten until the bowl stops shifting, then stop. Wipe off squeeze-out while it is soft.

Brushed nickel VIGO Elan pop-up drain stopper centered in a white oval vessel sink

The finished look: the Elan pop-up cap sits flat and centered in the bowl, with no gap showing at the flange.

07

Mount the faucet

When do you mount the vessel faucet?

Right after the bowl is set and before the trap goes on, while there is still room under the counter to reach the faucet's mounting nut. Your dry fit already confirmed handle room and stream position, so seat the faucet on its mark and tighten the nut from below.

The spout has to clear the rim and aim the stream near the drain, which is why vessel faucets run tall; VIGO's Elan Vessel Sink Faucet, for example, is a 12 in. single-hole design. How to Choose a Faucet for a Vessel Sink covers heights and real VIGO pairings, and our single-hole faucet install guide walks through the mounting hardware and supply lines.

08

Connect and test

How do you connect the trap and check for leaks?

Trim the tailpiece to meet the P-trap squarely and connect the trap with its slip nuts hand-tight; VIGO's instructions note the trap is not provided. A tall setup can leave a long tailpiece, so check your local code: the International Plumbing Code caps the drop from fixture outlet to trap weir at 24 in., per an ICC overview of trap rules.

If you sealed with silicone, wait out the cure time printed on its tube before testing. Then run water for a minute; with a pop-up, fill the bowl and release it. Run a dry paper towel around the drain nut, tailpiece and trap joints. If something is off:

Bowl wobblesThin or uneven sealant, a counter out of level, or a kit's ring left out. Re-bed the bowl; never fix a wobble by cranking the nut.
Drip at the drain nutWashers missing, dirty or out of order. Clean the seats and re-stack in the drawn order.
Water in the cabinet while drainingCheck for an overflow-style drain (a side port on its body) in a no-overflow bowl. Swap it for a no-overflow drain, then recheck the trap joints.
Slow grid drainClean the grid. Still slow with a full bowl? That is the grid; switch to a pop-up if you fill the bowl often.

Featured in this story

Bowls and drains from this guide
UltraThin Modern White Matte Stone 14 in. Round Vessel Bathroom Sink

UltraThin™ Modern White Matte Stone™ 14 in. Round Vessel Bathroom Sink

Solid-core Matte Stone, 14 in. across with a 4 in. basin depth, designed without an overflow.

$109.90

View product
Matte Shell Cavalli Glass Round Vessel Bathroom Sink in Black with Duris Faucet and Pop-Up Drain in Matte Black

Matte Shell Cavalli Glass Round Vessel Bathroom Sink in Black with Duris Faucet and Pop-Up Drain in Matte Black

A 15 in. round Matte Shell glass bowl, a 12 in. Duris faucet, and a matching pop-up drain and mounting ring in the box.

$299.90

View product
Elan Bathroom Sink Pop Up Drain Stopper

Elan Bathroom Sink Pop Up Drain Stopper

Solid-brass, no-overflow pop-up for vessel sinks, with Pop & Lock push-to-seal. Six finishes.

From $39.90

View product

Shop these categories

Explore the range

Vessel Sinks

Matte Stone, Concreto Stone™ and glass bowls, plus sets with a faucet and drain in the box.

Shop Vessel Sinks

Vessel Faucets

Tall single-hole faucets sized to clear a raised bowl.

Shop Vessel Faucets

Bathroom Accessories

Elan pop-up and Paloma grid sink drains, plus bath hardware sets in matching finishes.

Shop Bathroom Accessories

Reference

Questions, answered

Can I install a vessel sink myself?

VIGO's sink instructions call for a qualified, licensed plumber and a dry fit before any drilling, and its warranty terms note that glass sinks installed by an inexperienced person can break. Swapping a drain on an already-drilled top is simpler; VIGO describes its pop-up drains as designed for DIY installation.

Can I put a vessel sink over the hole from an old drop-in sink?

Not as a rule. A drop-in cutout is far larger than the 1-3/4 in. hole a vessel drain needs, so the bowl would sit over an open hole instead of solid counter, with nothing for the drain nut to clamp against. The dependable fix is a new or remnant top drilled for the vessel.

Will a VIGO drain fit another brand's vessel sink?

Usually, yes. VIGO's drain FAQ says its drains fit the standard 1-3/4 in. opening on most vessel sinks regardless of brand, provided the overflow matches: a bowl without one needs a no-overflow drain.

Can a vessel sink use a wall-mount faucet instead?

Yes. VIGO's UltraThin Matte Stone bowls, for example, pair with vessel or wall-mount faucets. A wall-mount faucet's valve and supply go into the wall before it is finished, so decide early.

How do I clean a matte stone vessel sink after it is installed?

VIGO's Matte Stone instructions call for a soft cloth and warn against abrasive cleaners, steel wool and harsh chemicals. Let the sealant cure fully before the first scrub.

What warranty covers a VIGO vessel sink?

VIGO bathroom sinks and drains carry VIGO's Limited Lifetime Warranty for residential installations. The terms require installation by licensed professionals following VIGO's instructions; warranty questions go to 866-591-7792.

Measure twice, drill once

Start with the bowl you love, then let its height set the vanity, its missing overflow pick the drain, and its rim set the faucet height. Questions before you drill? VIGO's support team is at 866-591-7792.